PREMIUM
EXPERIMENTAL
PREMIUM
PREMIUM
SE-KLB
EXPERIMENTAL
PREMIUM
ZLIN
Z-526
28- Decor
Note: Cut out the stickers and apply them in the proper area.
Do not peel the backing paper off all at once.
Peel off one corner of the backing and cut off with scissors.
Arrange sticker on model and when satisfied adhere the corner
without backing.
Carefully peel back the rest of the backing while at the same time
adhering the rest of the sticker.
Try not to make air bubbles, if there are some, carefully puncture
sticker (center of bubble) but not model surface with
the tip of the knife or sharp pin and squeeze out the air.
At curves stretch sticker and apply a little heat so that no ceases
occur.
Cut off the excess that is produced.
IMPORTANT: Please do not clean your model with strong
solvent or pure alcohol, only use kerosene to keep the
colour of your model not fade.
Red stripe decal
