-Using a aluminum motor mounting plate as a
template, mark the plywood motor mounting plate
where the four holes are to be drilled.
-Remove the aluminum motor mounting plate and
drill a 1/8”(3mm) hole through the plywood at each
of the four marks marked .
Note: The aluminum motor mounting included with
electric
motor set.
3mm
- Remove the
plywood motor mounting
and drill a
6mm
holes through the beam at each of the
four marks made above.
6
x
10
0mm.....
...
..4
6
mm nut.....
..
..12
6
mm washer...16
6
mm
! Align the mark on
plywood motor mounting
with the mark on the
fire-wall.
! Align the mark on
plywood motor mounting
with the mark on the
fire-wall.
ZLIN
Z-526
14- Electric motor
