Insert the vertical fin into the fuselage, precisely align
the vertical stabilizer as described in step 20B.
Apply the thin CA glue on the vertical stabilizer where it
contacts the fuselage.
! Securely glue together. If coming off during fly,
you lose control of your air plane.
Remove the vertical stabilizer from the
fuselage.
Using s sharp hobby knife,
carefully cut away the
covering
below the
lines
which were drawn in the
previous
steep.
Do not cut into the woods
as this
will affect the structural integrity of the stabilizer
.
CA
Apply thin CA
glue both sides
CA
Apply
thin CA
glue on both sides
of the hinge
HORIZONTAL STABILIZER
HORIZONTAL STABILIZER
TOP-SIDE
TOP-SIDE
Cut away only
the covering (both sides)
90 degree
triangle
Without using glue yet, push the elevator and its
hinges into the hinge slots in trailing edge of the
horizontal stabilizer.
HORIZONTAL STABILIZER
TOP-SIDE
CA
Apply
thin CA
glue on the bottom
of the hinge
! Securely glue together. If coming off during fly,
you lose control of your air plane.
ZLIN
Z-526
21- Vertical stabilizer
21A
21B
22- Installing the elevator
