Swing Gate Opener
User Manual
P a g e
| 33
Copyright©2022 ZKTECO CO., LTD. All rights reserved.
6
Maintenance
1. Check whether the gate normally operates every month.
2. For the sake of safety, each gate is suggested to be equipped with an infrared protector, and
regular inspection is required as well.
3. Before installation and operation of the gate opener, please read all the instructions carefully.
4. We reserve the right to change the instruction without prior notice.
7
Troubleshooting
Any troubleshooting work below done to the motor must be completed by a licensed
electrician and only whilst the power is off, and the motor is unplugged!
Problems
Possible Reasons
Solutions
The gate
cannot open or
close normally,
and the Display
does not light.
1. The power is off.
2. Fuse is burned.
3. Control board power
wiring with the problem.
1. Switch on the power supply.
2. Check the fuse, change it if it burns.
3. Rewiring according to instructions.
The gate can
open but
cannot close.
1. Photocell wiring with the
problem.
2. Photocell mounting with
the problem.
3. Photocell is blocked by
objects.
4. Sensitivity of obstacle is
too high.
1. If not connect photocell, please make sure
that the 5 and 6, 5 and 7 short circuit; if
connect infrared sensor, please make sure
the wiring is correct and the photocell is
N.C.
2. Make sure that the photocell mounting
position can be mutually aligned.
3. Remove the obstacle.
4. Reduce the sensitivity to obstacle.
The remote
control doesn’t
work.
1. Battery level of the remote
control is low.
2. Remote control is not
paired.
1. Change the remote-control battery.
2. Re-conduct remote control learning.
Press OPEN,
CLOSE button,
Gate is not moving smoothly.
According to the actual situation to adjust the
