1
1 Installation
1.1 Installation Conditions
When installing the tripod turnstile against the wall, please reserve at least 100 mm space for
opening the cover. As shown in Figure 1-1.
Figure 1-1
1.2 Cabling
1.3 Drilling Holes
Drill holes based on the locations of the screw holes.
Fix the device on the ground by 4 expansion screws.
1.4 Fix the Device
Power supply and communication wire suggested to deployed underground then into the cabinet of
device.
Note:
The tripod turnstile must be connected to the Ground (earth), there is wiring interface near
the power switch.