Smart Time Recorder User Manual 11
WIFI Connection
Communication>Wireless Network>WIFI, open it
, the device will
search available WIFI in the network range. Select an
available WIFI and input password. When the WIFI is connected successfully, the initial interface will display the
logo.
Add WIFI Network Manually
You can manually add the WIFI network when there is no WIFI in the list that you want to connect to.
Press
to select
“Add WIFI Network”
and enter the relevant parameters (The added network must exist).
Advanced Setting
Press
to select
“Advanced”
and set the relevant parameters as required.
DHCP:
Dynamic Host Configuration Protocol, which is to dynamically allocate IP addresses for clients via server. If DHCP is
enabled, IP cannot be set manually.
IP Address:
IP address for WIFI network, the default is
0.0.0.0, you can modify it as the actual network environment.
Subnet Mask:
The default is
255.255.255.0, you can modify it as the actual network environment.
Gateway:
the default is
0.0.0.0, you can modify it as the actual network environment.
