Detection Management Settings
> [
] > [
] to
.
Click on
System
Detection Management
enter the setting interface
14
When the
Allow unregistered people to access
is enabled, optionally, set
Enable
capture of unregistered person
to save the temperature data.
You can set the value of
High temperature alarm threshold
, and enable the
Temperature over the range; access denied
and the
Trigger external alarm
,
the device will send an alarm prompt when the temperature of the user detected
exceeds this value, meanwhile the user will be forbidden to access, as shown in the
following figure. The method of enabling
Mask detection
is the same.
Temp. Unit
℃
Temperature measurement distance Far
Detection Management
Display Body Temperature
Enable mask detection
Deny access without mask
Allow unregistered people to access
Enable capture of unregistered person
Trigger external alarm
Clear external alarm
Exter alarm delay(s) 255
Update Firmware
Display Thermodynamics Figure
Main Menu
User Mgt.
User Role
COMM.
System
Data Mgt.
Personalize
Attendance
Search
Autotest
System Info
Access Control
Date Time
Access Logs Setting
Face
Palm Parameter
Reset
Device Type Setting
Detection Management
System
37.30
0.00
Enable temp. screening with infrared
High temperature alarm threshold
Temp. over the range; access denied
Temperature deviation correction
Temp. Unit
Temperature measurement distance
Display Thermodynamics Figure
Display Body Temperature
Enable mask detection
Deny access without mask
Allow unregistered people to access
Enable capture of unregistered person
Detection Management
Far
O
C
O
C
08:50
Successfully verified.
Name:Mike
User ID:1
Verify:Face
Normal temperature
O
Temp.:
36.6 C
Mask Detected
08:50
Failed to verify.
Verify:Face
User ID:1
Without mask
High body temperature
O
Temp.:
38.6 C
