2
Figure 2-2
2.3 Chassis installation
1)
Verify the accessories on the list and gather tools.
2)
Posit the machine on the right place.
3)
Drill on the ground according to the positioning tape.
4)
Embedding four expansion bolts (M12) into the positioning holes.
5)
Remove the access cover, as shown in Figure 2-4A.
6)
Put pads and use a wrench to tighten nuts, as shown in Figure 2-4B.
7)
Close the access cover, as shown in Figure2-4C.
8)
Install the barrier arm (glass baffle or U-shaped stainless steel pipes), as shown in Figure2-4D.
1
Figure 2-3A
2
Figure 2-3B
Screw pad
Chassis
Ground
Expansion bolt
4-M12
Ground
Base concrete
