PA22
User Manual
P a g e
| 55
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
16.
Connection to ZKBioSecurity Software
16.1.
Set the Communication Address
In Device
1.
Click
COMM.
>
Ethernet
in the main menu to set the IP address and Gateway of the device. (
Note:
The IP address should be able to communicate with the ZKBioSecurity Server, preferably in the same
network segment with the Server address)
2.
In the main menu, click
COMM.
>
Cloud Server Setting
to set the Server address and Server port.
Server Address:
Set the IP address of the ZKBioSecurity Server.
Server Port:
Set the Server port of ZKBioSecurity (The default is 8088).
In Software
Login to ZKBioSecurity software, click
System
>
Communication
>
Communication Device
to set the
ADMS service port, as shown in the figure below:
16.2.
Add Device on the Software
You can add a device by the searching process. The procedure is as follows:
1.
Click
Access Control
>
Device
>
Search Device
to open the Search interface.
2.
Click
Search
, and it will prompt
Searching
…….
3.
After searching, the list and the total number of access controllers will be displayed.
