PA22
User Manual
P a g e
| 40
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
9.
Access Control
Select
Access Control Options
on the main menu interface, to set the schedule of the door opening, and
locks control and to configure other parameters settings related to access control.
To gain access, the registered user must meet the following conditions:
The relevant door’s current unlock time should be within any valid time zone of the user’s time period.
The corresponding user’s group must be already set in the door unlock combination (and if there are
other groups, being set in the same access combo, then the verification of those group’s members is
also required to unlock the door).
In default settings, new users are allocated into the first group with the default group time zone, where
the access combo is "1" and is set in unlock state by default.
9.1
Access Control Options
To set the parameters of the control lock of the terminal and related equipment.
Select
Access Control Options
on the
Access Control
interface.
Function Description:
Function
Descriptions
Gate Control
Mode
It toggles between
ON
or
OFF
switch to get into gate control mode or not.
When set to
ON
, the interface removes the Door lock relay, Door sensor relay, and
Door sensor type options.
Door Lock
Delay (s)
The length of time that the device controls the electric lock to be in unlock state.
Valid value: 1 to 99 seconds.
