Important Notes
Before registration, the new locks can be unlocked by any authentication method by
default.
An administrator must be registered first, before any other operation in the
Standalone Mode.
Four alkaline AA batteries (not included) are needed to power the device. Non-
alkaline and rechargeable batteries
ARE NOT RECOMMENDED
.
Do not remove batteries from the lock when it is operating.
Batteries must be replaced when the lock flashes the red light along with 2-second
beeps after being turned on.
The locks are also equipped with mechanical keys for manual unlocking. Please keep
the mechanical keys at a safe place.
Fingerprint positioning tips:
1.
2.
3.
4.
5.
6.
7.
Note:
Please use the correct method when pressing your fingers onto the fingerprint
reader for registration and identification. Our company will assume no liability for
recognition issues that may result from incorrect usage of the product. We reserve the
right of final interpretation and modification concerning this point.
Recommended fingers: Index, middle, or ring fingers; avoid using the thumb or pinky,
as it is difficult to accurately press onto the fingerprint reader using those.
Too low
Too close to the edge
Vertical
