MA300
User Manual
P a g e
| 15
Copyright©2023 ZKTECO CO., LTD. All rights reserved
There are three ways to delete the management card:
ZKBioAccess IVS Software:
Check the
Clear Data in the Device when
Adding
option when adding the device to the software. For details, see
Tamper switch:
To restore the device to factory settings. For details, see
Webserver:
To delete all data in the device. For details, see
The fingerprints of the user who bears a management card can only be
enrolled through software. For details, see
Tip:
Users who bear management card can only verify their identity and
unlock using their fingerprints previously enrolled.
Operation Timeout
2.5
30 seconds is the default operation timeout. If there is no operation when you
delete/enroll a user, the system prompts you once every 10 seconds and then
it returns to the verification state after three prompts. The voice prompt is
“Operation timeout. The system returns to verification state”.
