MA300
User Manual
P a g e
| 19
Copyright©2023 ZKTECO CO., LTD. All rights reserved
d.
The system automatically returns to the verification state when
both 10 fingers and card are enrolled, the management card is
swiped once or the operation times out.
(2)
Press finger(s) first
a.
Press the same finger over the sensor three times following the
voice prompts by adopting the proper fingerprint placement. If
fingerprint enrollment succeeds, the system generates the voice
prompt “
: User number **. Registration is successful” and you
can proceed to step
b
; if fingerprint enrollment fails, the system
generates the voice prompt “
: Please press your finger again”
and returns to the enrollment state, waiting for you to press your
finger or swipe your card.
b.
After generating the voice prompt “
: Register. Please press
your finger or punch your card”, the system enters the specified
user information enrollment state, waiting for you to swipe your
new card or press your finger.
c.
If the card enrollment succeeds, the system generates the voice
prompt “
: Registration is successful. Register. Please press your
finger” and enters the fingerprint enrollment state directly; if you
press a finger that is not enrolled before and succeeds in
enrollment of this finger, the system generates the voice prompt:
“
: Registration is successful. Please press your finger or punch
your card” and you can continue enrolling new fingerprints and
card. After you enroll 10 fingerprints, the system will generate
the voice prompt “
: Register. Please punch your card” to enroll
your card if your card is not enrolled.
