KF1000-U Facial Recognition Extension Reader
User Manual
P a g e
|
7
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
2
Installation Set-up
Make sure that the device is installed as per the installation instructions.
Otherwise, you will bear any
consequence resulting from your actions.
Install on the wall
Step 1:
Drill two mounting holes at suitable locations on the wall. The recommended installation
height of the camera from the ground is 1.5 meters, which can be adjusted appropriately
according to actual needs.
Step 2:
Secure the back plate on the wall with the wall mounting screws.
Step 3:
After passing the wires through the wiring hole and connecting them to the device, and then
attach the device to the back plate from top to bottom.
Step 4:
Fasten the device to the back plate with a security screw.
