ZKTeco inBIO260, User Manual

Page: 35 / 40

InBio160/260/460 Pro Access Control Panel User Manual
P a g e | 34 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Operating steps:
a. Click Network Setting > TCP/IP Settings .
b. Input the device’s IP address, Subnet Mask, Default Gateway.

IP address
: the default IP is
192.168.1.201
, and you can modify according to the actual.

Subnet Mask : the default subnet mask is 255.255.255.0, and you can modify according to the
actual.

Default Gateway : the default gateway is 0.0.0.0, and you can modify it according to the actual.

Primary DNS : the default value is null, and you can set its value.
c. Click
Confirm
to write parameters into the device. please restart the device by manual.

Communication Settings
1. PUSH Server Settings

PUSH Server : Indicates that the controller proactively pushes information to the server.

IP Mode
: the default server IP is 0.0.0.0, and you can modify it according to the actual.

Port : the default Port is 80 , and you can modify it according to the actual.

Domain Mode : the default value is null, and you can set its value.
2. Port Settings