ZKTeco inBIO260, User Manual

Page: 11 / 40

InBio160/260/460 Pro Access Control Panel User Manual
P a g e | 10 Copyright©2020 ZKTECO CO., LTD. All rights reserved.

Cycle use : 14.5V~14.9V(25)

Initial current: less than 2.88A1

Standby use: 13.6V~13.8V(25)

Capacity: 12V, 7.2Ah/20hr

Battery Type: LC-RA127R2T1
Battery Caution:

Do not charge in a gas tight container.

Do not short the battery terminals.

Do not incinerate.

Flush with water at once if contact is made with electrolyte (Acid).

Do not attempt to disassemble the battery.
Control Panel Indicators 2.3
When the InBio160/260/460 Pro is powered on, normally the POWER indicator (red) is lit constantly, the
RUN indicator (green) shall flash slowly (indicating the system is normal), and other indicators are all off.

LINK indicator (green):
indicates proper TCP/IP connection if it is lit constantly;

ACT indicator (yellow): indicates transmission of TCP/IP data if it flashes;

EXT RS485 (TX) indicator (yellow): indicates sending of 485 data if it flashes;

EXT RS485 (RX) indicator (green): indicates receiving of 485 data if it flashes;

CARD indicator (yellow):
indicates input of Wiegand signal if it is lit.
Indicator Diagram:
Figure 2-1 Indicators in the InBio460 Pro