BioSense Series Network Video Recorder User Manual
P a g e
| 83
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
14.7.
Channel Management
14.7.1.
Mode Switch
Click
Start > System Manage > System Parameters > Display Parameters > Display Mode
to set the
channel’s parameters. There are multiple options for full-analogy mode and composite mode.
14.7.2.
IP Channel
If you use composite mode, you can manage the IP channels and Analog channels at
Start > Channel
Manage > Channel Device.
Click
Add Channel
button and click
Refresh
button to search out the IPCs in the LAN, and tick the
checkbox to select the IPCs, then click
Add
button to add them to the video recorder.
Click
Add Channel
button and select
Manual Add
, then fill in the correct parameters to add the IPCs.
Note:
Features mentioned in this section are only for the devices which support IP channels.
14.7.3.
Video Encode Configuration
Left click the Start button into
Main Menu > Channel Manage > Regular Config > Media Parameters
to
configure the corresponding channel’s encoding parameters.
•
Stream Type:
Main Stream/Sub Stream.
•
Video Type:
Video Stream/Composite Stream.
•
Resolution:
HD 1080P/ 960H/ 2M/ etc.
•
Image Quality:
Good/ Best/ Low.
