38
Atlas Bio Series Access Control Panels Installation Guide
Copyright©2020 ZKTeco USA. All rights reserved.
The important option here is
“Configure IPv4”.
The primary controller must have a static IP address. This is because secondary controllers need to know how
to find the primary on the network. Additionally, the users need a consistent address to log in to the
Web
Management Application.
To assign a static IP address, choose
“Manually”
and enter the IP address and configuration specified by the
network administrator.
Using "DHCP" is probably the right choice for secondary controllers, unless you have a complicated network as
discussed below under
“Special Considerations for Complex Networks”
.
Wireless Networking:
If your controller model supports WiFi, you still need to set up a wired connection,
here. You can add your wireless connection once you log in to the Web Management Application. See the
online help topic, “
Administration: Network
”.
Page 8: Review
All your entries are displayed for review. Click either “
Back
” or “
Complete Setup
”.
After completing setup, you may disconnect the direct Ethernet cable.
