ZK-RFID102 UHF RFID Reader User's Manual V2.0
7
4
Write EPC
0x04
The function is used to write EPC value in a Tag’s EPC
memory. Random write one tag in the effective field.
5
Kill Tag
0x05
The function is used to kill tag. After the tag killed, it never
process command.
6
Lock
0x06
The function is used to set Password area as readable and
writeable from any state, readable and writeable from the
secured state, permanently readable and writeable, never
readable and writeable. It used to set EPC, TID or User as
writeable from any state, writeable from the secured state,
permanently writeable, never writeable.
7
Block Erase
0x07
The function is used to erase multiple words in a Tag’s
Password, EPC, TID, or User memory.
8
ReadProtect
0x08
The function is used to set designated tag read protection. After
the tag protected, it never process command. Even if inventory
tag, reader can not get the EPC number. The read protection
can be removed by executing Reset ReadProtect. Only NXP's
UCODE EPC G2X tags valid.
9
Read Protect
(without EPC)
0x09
The function is used to random set one tag read protection in
the effective field. The tag must be having the same access
password. Only NXP's UCODE EPC G2X tags valid.
10
Reset ReadProtect
0x0a
The function is used to remove only one tag read protection in
the effective field. The tag must be having the same access
password. Only NXP's UCODE EPC G2X tags valid.
11
Check ReadProtect
0x0b
The function is used to check only one tag in the effective field,
whether the tag is protected. It can not check the tag whether
the tag support protection setting. Only NXP's UCODE EPC
G2X tags valid.
12
EAS Alarm
0x0c
The function is used to set or reset the EAS status bit of
designated tag. Only NXP's UCODE EPC G2X tags valid.
13
Check
EAS Alarm
0x0d
The function is used to check EAS status bit of any tag in the
effective field. Only NXP's UCODE EPC G2X tags valid.
14
Block Lock
0x0e
The function is used to permanently lock the designated data in
designated tag’s user memory. The locked data can be read
only, but not written and not erased. Only NXP's UCODE EPC
G2X tags valid.
15
Inventory(Single)
0x0f
The function is used to inventory one tag in the effective field
and get their EPC values.
16
Block Write
0x10
The function is used to write multiple words in a Tag’s
Reserved, EPC, TID, or User memory.
