Instructions for Installation and Use of the C3100/200/400 Control Panel
2
If the equipment cannot work normally even though operated as
instructed, please be sure to adjust only the control components specified
in the operation instructions. Incorrect adjustment of other control
components may cause damage to the equipment, and add to
troubleshooting workload of the qualified technicians.
The equipment falls down or its performance changes obviously.
8.
Replacing components: If it is necessary to replace a component, the repair
personnel must use only the substitutes specified by the manufacturer.
9.
Security inspection: After the equipment is repaired, the repair personnel are
supposed to conduct security inspection to ensure the equipment can work
normally.
10. Power supply: Operate the equipment with only the type of power supply
indicated on the label. Contact the operator for any uncertainty about the type
of power supply.
1.2 Installation Cautions
1.
All wires must run through casing pipes, for example PVC or galvanized pipes, to
prevent failure caused by rodent damage. Although a control panel is designed
with good antistatic, lightningproof, and leakageproof functions, ensure its
chassis and the AC ground wire are connected properly and the AC ground
wire is grounded physically.
