ZK ZK-SAM User Manual Download

Page: 66 / 66

A-2

ZK Celltest, Inc.

NOTES:
1) Analog cellname look-up is not supported for RCU/ZK-SAM products. The fields may import
and export but there is no reporting of cellname for Analog for RCU/ZK-SAM.

Cellsite File 4.x Format History:

* 2007-03-05, removed some incorrect comments about display/logging of “SectorID.Cellname”.
Cosmetic clean-up to formatting.

V4.2 -- 2007-04-23, (9.2 firmware) Add iDEN support, including new iDEN only BRR field # 14.
Also many refinement to document content and formatting.

Analog DCC

integer

yes

Optional for Cell Type=C or T. If Cell Type='A', this field is required.

Hyperband must be c if DCC is specified.

If SAT is specified then DCC must be specified as well.

Analog SAT

integer

yes

Optional for Cell Type=C or T

If Cell Type='A', this field is required

Hyperband must be c if SAT is specified. If DCC is specified then SAT

must be specified as well.

Analog

Channel Set #

integer

yes

If sector# is blank then only SAT/DCC are used for cellname look-up.

Hyperband must be c.

Color
Code

(Tech-

nology

Spe-
cific)

Cell

Type='C

CDMA

501

decimal

511

CDMA PN

Cell

Type='T'

TDMA
DVCC

196

decimal

255

TDMA DVCC

Cell

Type='G

GSM
BSIC

octal

GSM BSIC (BSIC in OCTAL (0-77), not decimal (0-63))

Cell

Type="

GC"

GSM

BCCH

150

decimal

1023

GSM Broacast Control CHannel -- BCCH (BCCH in decimal (0-1023))

Cell

Type='I'

iDEN

Carrier#

5EF

hexadeci-

mal

001

5EF

iDEN Carrier Number

Cell

Type='A

Analog
(blank)

(blank)

yes

The only case where blank is valid for this field is for Cell Type = A (Ana-
log).

For an analog only cell site, Color Code(s) indicated in Analog DCC and
Analog SAT and Analog Channel Set# fields.

iDEN BRR

123

integer

000

999

yes

Base Radio information.

This field is only supported for iDEN (Cell Type = I) -- it must be blank for

other Cell Types.

This is a 3 digit decimal number which is intended to be used to encode

inforrmation related to the base radio associated with the iDEN carrier

number. If the field is blank the value 000 will be reported/exported.

Cellsite File Format

Summary of Contents for ZK-SAM



































































Search results

Summary of Contents for ZK-SAM

Reviews:

Related manuals for ZK-SAM

Brands by name

Popular brands

ZK ZK-SAM, User Manual

Search results

Summary of Contents for ZK-SAM

Reviews:

Related manuals for ZK-SAM

Brands by name

Popular brands