ZK ZK-SAM, User Manual

Page: 10 / 66

4 ZK Celltest, Inc.
Quick Start
NOTE: The Compact Flash memory card must be securely in its slot for
the unit to function properly. When removing the Compact Flash card you
must FIRST turn the unit off, otherwise you risk losing data and corrupting
the compact flash card file system.
Voice Call Testing
To get up and running right away do the following:
Step 1. Securely install the Compact Flash memory card in the unit.
Step2. After installation, turn on the phones, and turn on power.
Step 3. In the Phone Setup Screen select the correct phones for the phone
connections.
Step 4:In the Main Menu highlight SAM-ALL and press ENTER
Step 5: Use the arrow keys to change screens.
Data Call Testing
To get up and running right away do the following:
Step 1. Securely install the Compact Flash memory card in the unit
Step2. After installation, turn on the phones, turn on power.
Step 3. In the Phone Setup Screen configure for the CDMA or GSM phone
and connect the data-capable phone to the unit.
NOTE: Data testing works only when the direct connect cable is used.
Data testing will not work when the phone is connected to the
unit via the handsfree kit.
Step 4. Enable the Dual-Port Mode. See “Dual-Port Setup . . .:” on
page 39.
Step 5. Configure the Link. See “Link Setup . . .:” on page 38.
Step 6. In the Main Menu highlight SAM-ALL and press ENTER.
Step 7. Use the left/right arrow keys to change screens and go to the “Data
Test” Screen.