505, 8
th
Avenue, 10
th
Floor, New York, NY 10018. Tel: 212-9910090 email: [email protected]
Before Installation
Read all instructions prior to installation
.
1.
Prior to beginning installation,
cut off all power
to prevent personal
injury and damage to S900 and peripheral equipment.
2.
Connect the ground wire first, in order to prevent electro-static damage
to the S900.
3.
Connect power supply to the S900
last
. If the S900 does not operate
properly,
always cut off power to it
before examining/dismantling. Be
advised that wiring the S900 while power is on may cause damage to the
device. Possible resulting damage from not powering off the S900
prior to wiring is not covered by manufacturer’s warranty.
4.
Mount the S900 at a comfortable height, typically between 4 and 5 feet from
the ground.
5.
After installation, remove protective film from the S900 display and
fingerprint sensor.
6.
To prevent being accidentally locked out while testing the exit-door
button, keep a person on the inside of the door.
7.
Run the auto-test function to confirm that installation is successful.
8.
In order to maximize the life of the S900, use the auto-sleep and wake up
functions.
9.
We recommend using a
12V DC 1.5Amp
power supply for proper
functioning of the S900 terminal. If the incorrect voltage is used, the
S900 may keep rebooting or may not operate the electric door lock (if
attached).
-1-