23
7.SECURING THE CHILD
When your child’s weight is between 0-13kg.
It need to fix your child by the 3 point harness.
According the follow step:
7.1.Relax the harness before adjust the height,
One hand press down the center adjuster(part
no.10
page 01),at the same time the other hand hold the
shoulder belt(part no.03 page 01)and pull back.
(fig.31).
7.2.Relax the buckle: push down the release but-
ton on the buckle(part no.23 page 01),the buckle
tongue will jump out. then put the harness to the
both side of seat.(fig 32).
7.3.Put your child on the child seat, let the buck-
le(part no.22 page 01)is on the front of your child’s
crotch. Make your child’s arms through the should
belt(part no.03 page 01), the shoulder belt and the
shoulder pad just on the top of your child’s shoul-
der.(fig 33).
Adjust the harness and headrest height refer to
(chapter 4.4).The top of the shoulder belt must be
parallel or a little higher than the child’s shoulders.
Too high or too low is not suggested. (fig 33).
7.1.4.Reassemble buckle (part no.22 page 01)
until you hear a”click”(fig.34).
7.1.5.Pull back the adjust belt(part no.07 page 01)
make the harness tight. To be ensure there should
not be more than a fingers width between the
harness and your child. It’s most importance
of ensuring that any lap strap is worn low
down, so that the pelvis is firmly engaged,
shall be stressed.(fig.35).
NOTICE:
If the harness is too tight,please
relax it then adjust it again.
