Chapter 8. Alphanumeric Keypad and Display
M7IRDA2003I
7IRD-A/J/M: Distribution Protection & Control Terminal
© ZIV APLICACIONES Y TECNOLOGÍA, S.L.U. 2020
8-22
8.5
Control Function Access
The screen of the Alphanumeric Display associated with the Control functions is characterized
by displaying the word
[CON]
in the upper right part.
The following figure is a block diagram that describes, the structure of the screens associated
with the Control functions and the method of access.
All the functions in the equipment associated with the Control module are affected by variations
in the Configuration. Therefore, the menus found in the option
CHANGE SETTINGS
(GENERALS, TIMES, LOGIC SETTINGS and ANALOG) will vary depending on the
Configuration loaded in the equipment. The figure corresponds to a specific case but is useful
as an example of the Alphanumeric Display menu structure associated with the Control
Subsystem.
Configuration Settings: HMI Access
0 - CONFIGURATION
0 - PASSWORDS
1 - CHANGE SETTINGS
1 - COMMUNICATIONS
2 - LOAD CONFIG PROGRAM
2 - DATE AND TIME
0 - CONFIGURATION
0 - PASSWORDS
0 - PASSWORD 1
1 - CHANGE SETTINGS
1 - COMMUNICATIONS
1 - PASSWORD 2
2 - LOAD CONFIG PROGRAM
2 - DATE AND TIME
2 - PASSWORD 3
0 - CONFIGURATION
0 - PASSWORDS
0 - TERMINAL ADRESS
1 - CHANGE SETTINGS
1 - COMMUNICATIONS
1 - BAUD RATE
2 - LOAD CONFIG PROGRAM
2 - DATE AND TIME
2 - STOP BITS
3 - PARITY
4 - COM TIMEOUT
5 - FRONTAL PARITY
6 - FREQUENCY
0 - CONFIGURATION
0 - PASSWORDS
1 - CHANGE SETTINGS
1 - COMMUNICATIONS
2 - LOAD CONFIG PROGRAM
2 - DATE AND TIME
