2 / 4
©2018 EMS Ltd. All rights reserved
3 / 4
©2018 EMS Ltd. All rights reserved
Specification
Operating
Temperature
-10 to +50°C
Storage
Temperature
-20 to +60°C
Humidity
Up to 95% non-condensing
Supply
6x AA Alkaline (Panasonic LR6AD
Powerline / Varta 4006 Industrial)
IP Rating
IP32
Operating
Frequencies
868 MHz
Output Transmitter
Power
Variable 0-14 dBm
Dimensions
113mm (Ø) 40mm (D)
(No remote indicator)
113mm (Ø) 90mm (D)
(With remote indicator)
Weight
0.30kg (No remote indicator)
0.40kg (With remote indicator)
Mounting
positions
Figure 3
Figure 5
Programming
The Ziton Wireless Remote Indicator requires
programming onto the system.
Please Note: The final commissioning and hand over of
the wireless fire system to the end user is the
responsibility of the fire installation contractor.
Approved to
EN54-25
Application
Indoor use only
European Union
directives
EMS declares that the radio
equipment
type
Ziton Wireless
Remote Indicator is in compliance
with Directive 2014/53/EU. The full
text of the EU declaration of
conformity is available at the
following internet address:
www.utcfssecurityproducts.eu/dop/
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
upon purchase of equivalent new
equipment, or dispose of it at
designated collection points. For
more information see
www.recyclethis.info
Contact information
For contact information, see www.utcfireandsecurity.com
TSD170 Iss 4 17/10/2018 AJM
TSD170 Iss 4 17/10/2018 AJM
Battery fitment
The Ziton Remote Indicator is powered by 6 x AA alkaline
batteries. These are supplied fitted. Should batteries
require replacement, only use specified batteries whilst
observing correct polarity as shown in Figure 4.
Tamper
spring
Figure 4
Device Reassembly
To reassemble the unit, firstly fit the remote indicator
section to the wireless module by turning clockwise to
achieve a positive location.
Then the wireless module should be re fitted to the
mounting plate by turning it clockwise to achieve a
positive location. Ensure that the tamper switch operates
correctly. The switch should make contact with the
mounting plate.
Device Locking
The device can be locked into its mounting plate by
removing the cut out section as shown in Figure 5 .
To unlock the device, insert a flat bladed screwdriver into
the release slot and turn the remote indicator counter
clockwise to release it from the wireless module as shown
in Figure 6.
Figure 6
THIS WAY UP
WHEN WALL
MOUNTING
Regulatory information
Manufacturer
EMS Ltd.
Technology House, Sea Street,
Herne Bay, Kent, CT6 8JZ,
United
Kingdom
Year of
manufacture
See serial number label inside unit
Certification
Certification body
CPR Certificate
0359-CPR-00424
0359
14
