Zirkon zahn ZIRKONOFEN 700, Operator And Maintenance Manual

Page: 9 / 44

09 09
PICTOGRAMS ON THE ZIRKONOFEN 700 & 700 ULTRA-VAKUUM
The symbols (indications) listed below are attached to the device and serve to indicate uncertain
and dangerous situations. The symbols have to be kept clean and immediately exchanged, if they
detach or if they are damaged.
Please read this Operator’s and Maintenance Manual very carefully before using
VJGFGXKEGHQTVJGſTUVVKOG
Pay attention to hot surfaces when opening the furnace.
If symbols or pictograms (hazard and behaviour information) on the furnace are not recognizable
anymore or if they came off, the operator has to replace them immediately.
CHECKLIST OF COMPONENTS - STANDARD VERSION
Packing list - Equipment:
Zirkonofen 700 or 700 Ultra-Vakuum with 4 heating elements
Firing tray
Power cable
USB cable to connect a PC to the furnace, if necessary
Fuse T 20A
Fuse F 0,25A
Sinter Metal Furnace Adapter (only for the Zirkonofen 700 Ultra-Vakuum)
If one of the components listed above is not contained in the supply, immediately contact your
Zirkonzahn partner.