___ ZipSpin
9
Chapter 6 Operation Guide
1. Making a Copy with AutoStart.
This operation will guide you to make a copy from the Master Source Disc to a Blank CD/DVD disc.
A.
Power on the systems by pressing the button on the lower right front of the unit. You will then
see the system initializing and forming a self test on the front panel LED. The LCD will show
“System Check”, and then switch to “1. Copy Disc” mode automatically. Insert the master disc in
the top drive and blank disc in the lower drive.
< < < ZIPSPIN > > >
1. Copy Disc
B.
The system will analyze the discs and then begin copying. During the copying, the LCD screen
will display Master Source Disc’s data size and copying progress.
write speed
total disc length [MM:SS]
Write 32x [32:22]
Audio CD 00:12
disc type
actual progress
C.
After completion, the system will synchronize the copied disc and eject the bottom tray
automatically. Insert another blank disc for additional copy or replace the master disc for a new
copy.
☆
Note: You can also change the AutoStart burn speed for CD, Audio CD and DVD. Go to
Menu function 7.5 to select different speed. Default speed is
CD 40X, Audio CD 24X, DVD 8X, DL DVD 2.4X
(lower burn speed normally can produce better quality copies)
