Zipro Tekno, User Manual

Page: 22 / 111

22
EN
 The power cord must not be crushed and should be placed in such a way as to prevent
tripping over it.
GROUND
Ground connection prevents electrocution. The treadmill has a ground cable and plug.
The plug has to be connected to a correctly installed and grounded mains socket.

Before connecting the device to the mains, make sure the local voltage conforms to the
type of the plug.

Do not modify the plug if it does not fit the socket. In such a case have another socket
installed by a qualified electrician.
DANGER!
Incorrect connection of the cable may cause a risk of electrocution.
If you have any doubts
whether the treadmill is grounded correctly, contact the technical service or a qualified
electrician.
CAUTION!
Inform any bystanders about the hazards occurring when the device is used. Be extremely
cautious when children are around.
CAUTION! Before starting a training consult a doctor to make sure it will be safe for you to use the device.
You can develop a training plan with an expert. Inappropriate training programme or excessive exercise may
pose a hazard to your health and life.
WARNING! Heart rate monitoring systems may be inaccurate. Over-exercising may result in serious
injury or death. If you feel faint, stop exercising immediately.
CAUTION!
Strictly follow the training recommendations in the manual.
 When choosing the training location take into account safe distances to any potential obstacles. Do
not place the device near paths or traffic (roads, gates, passages, etc.).
 Do not use the product close to a wall. The safety zone is 2000 mm long and not narrower than the
device.
CAUTION! Be careful during the assembly and do not let children near the assembly area. They may ingest
small parts used during the assembly (nuts, bolts, etc.).
RESIDUAL RISK
 Only 13 out of over 230 causes are ‘generally acceptable’ following risk controls.
 If no fall safeguard is applied or it is applied incorrectly, there is a residual risk of falling resulting in
skin abrasions, bruises, bone fractures, or even death.
 There is a residual risk of unintended over-exercising caused by incorrect operation or judgement,
and also incorrect communication (due to electromagnetic interference, software error, etc.). Even
the best software and equipment safeguards cannot prevent software or equipment errors, which
can, in theory, cause over-exercise.
 The product is an electric device. Therefore, electric shock, potentially leading to death, is possible.
 The residual risk of suffocation cannot be prevented.

It can be mitigated by following safety information in the operating manual.

Unintended or prohibited use may cause other risks not specified here. The specified risk may have
been estimated incorrectly.
The risk analysis assessment has been performed on the device ‘as is’. The product assessment and
control intricate that the probability of unacceptable risk is very low. The device (its design, operation,
and use) does not cause unreasonable risk for the user or third parties under normal circumstances.