9
UC5e SM (Rev1-3) May 2001
3. VIDEO I/F INSTALLATION PROCEDURES
3.1 VIDEO I/F KIT TYPE-10 PARTS LIST
No.
Description
Qty.
32
Interface Board
1
33
Relay Harness
1
34Stepped Screw – M2.6
2
35
Tapping Screw – M3 x 6
2
Table 3.2.1. Video I/F kit Type-10.
3.2 INSTALLATION PROCEDURES FOR INTERFACE KITS
NOTE:
1)
The UC5E Controller is designed for the Model C237 and Model C235
range of Digital Duplicators.
2)
Numbers in parentheses ( ) in the installation procedures correspond to
the part numbers in Tables 3.1.
3.2.1 MODEL C237
1.
Turn off the main switch and unplug the power cord.
2.
Remove the upper rear cover.
3.
Remove the MPU cover.
4.
Connect CN102 of the printed circuit board (32) to CN110 of the MPU board and
secure it using two screws (35).
5.
Connect the harness (33) to CN101 of the printed circuit Board, and
secure it to the connector bracket using two stepped screws (34).
6.
Remove the communications port cover plate (blinding cover) from the upper rear
cover.
7.
Reinstall the MPU cover.
8.
Reinstall the upper rear cover.
NOTE:
The On-line key on the operation panel is enabled automatically when the
UC5E and interface kit are installed.
Summary of Contents for UC5E
