ZipRip UC5E, Service Manual

Page: 17 / 45

17 UC5e SM (Rev1-3) May 2001
5.5 MEMORY TROUBLESHOOTING
For the memory replacement, refer to section 6.5.
5.6 LED STATUS LIGHT SEQUENCE AND CONDITIONS
5.6.1EVENT: POWER ON AND ACTIVATION
Status Contents Check Point
•
Check message on operation
panel.
All LEDs are off.
No power supply
•
No AC power, AC cord not properly
connected, or power supply failure in
the UC5E.
LEFT Red LED is
flashing Self-diagnostic test
before ready
•
1 Quick flash & no of flashes for
version of firmware.
Right RED LED is on
Power on.
LEFT Red LED is
flashing rapidly UC5E is receiving
data.
•
Check to see if there is a print job
in the print queue of the network
server, the print manager, or the print
spooler in computer (option)
LEFT Red LED is
on continously UC5E is transfering
data / making a
master.
•
Check to see if there is a print job
in the print queue of the network
server, the print manager, or the print
spooler in computer.(option)
LEFT RED LED Is
continuously off
The UC5E is idle
LEFT Red LED
flashing slowly and
evenly
Error on Priport
Right Red LED is on