14
UC5e OM Rev2-1 July 2004
GDI Printer Driver Installation
NOTE:
Before beginning the driver installation ensure you are in
possession of your Windows Operating System CD.
Once you have installed and tested your UC5E hardware, you will need to
install a GDI printer driver. Please follow the instructions relating to the
operating system installed on the PC connected to the UC5E.
Note: To allow fastest printing to the UC5E, we recommend that the parallel
port is set to “ECP Mode”. On most new PC’s this is the default setting.
However, on older PC’s you may have to set this in the BIOS configuration
utility. If you are unsure of how to do this, please check with your PC sup-
plier, or IT support staff. As a guide, most PC’s enter the BIOS when either
“delete” or “F1” keys are pressed at boot up. Once the BIOS programme is
running the “Parallel Port Mode” setting can generally be found in the “Chipset
Features” or “Integrated Peripherals” section.
The following pages will give detailed and illustrated instructions on how to
install the GDI Printer driver for the following operating systems:-
Windows 95/98
Windows NT
Windows 2000
Windows XP
