OWNER’S MANUAL ZIPPY 3 / 4 LITE
27
Reinstall the Drivetrain
1.
Line up the frame and the drivetrain. See figure 19.
WATCH FINGER PLACEMENT! BE CAREFUL NOT TO PINCH YOUR FINGERS!
2.
Lower the frame onto the drivetrain. Push down on the frame until there is no visible gap
between the two sections. See figure 20.
Install the Battery Pack
3.
Gently lower the battery pack onto the frame. See figure 21.
Raise the Tiller
4.
Loosen the tiller adjustment knob and raise the tiller. See figure 22.
5.
Tighten the tiller adjustment knob at the desired position.
MAKE SURE YOU TIGHTEN YOUR TILLER KNOB TO BE SURE IT IS SECURED IN THE
DESIRED POSITION!
Figure 19: Drivetrain Alignment
Figure 20: Connecting Frame and Drivetrain
Figure 21: Battery Pack Installation
