OWNER’S MANUAL ZIPPY 3 / 4 LITE
19
Seat Rotation Lever
The seat can be rotated through 360° and locked at any 45° position.
1.
Pull up on the seat rotation lever and rotate the seat to the desired position. See figure 8.
2.
Release the handle to lock the seat at any 45° position.
Seat Height Adjustment
To adjust the seat height:
1.
Pull up on the seat rotation lever and lift the seat up and off of the seat pedestal. See figure 9.
2.
Remove the detent pin or nut and bolt that holds the seat post in the seat pedestal. See figure 8.
3.
Position the seat post at the desired height while aligning the holes in the seat post and the seat
pedestal.
4.
Reinstall the detent pin or nut and bolt.
5.
Pull up on the seat rotation lever when replacing the seat back onto the seat post.
Figure 9
Figure 10
Do not sit in or attempt to move your Zippy Lite unless the frame and rear carriage
are securely engaged. Accidental separation of the frame from the rear carriage may
occur and cause injury or damage.
Never sit on your Zippy Lite in freewheel mode.
Never disengage the park brake while you are operating your Zippy Lite.
Always make certain that your scooter park brake is engaged before inserting the
key into the key switch and turning it to the on position.
FREEWHEEL MODE
Your Zippy Lite™ is equipped with a freewheel lever that can set your scooter in or out of freewheel
mode. The freewheel lever engages your park brake.
To disengage the park brake and put your scooter in freewheel mode: Pull forward on the freewheel
lever towards the letter N (Neutral Position). See figure 11.
To engage the brake and take your scooter out of freewheel mode: Push back on the freewheel lever
towards the letter D (Drive Position). See figure 11.
