7
Do an inventory of all the parts, to be sure that everything is there. If anything is missing
or damaged, contact us as soon as possible, so that we can get replacements to you quickly.
Tub Jig
We recommend that you make a jig for the tub.
This can be as simple as two straight pieces of ½ to ¾ inch thick wood.
It can be as elaborate as 1/8 by 2 inch aluminum angle with adjustment slots for different tub
widths.
Either way, you need something to clamp the tub sides to.
Every critical component on this hull depends on a straight, square tub.
Do whatever it takes to get it done correctly.
The assembly order and the direction that parts must face is important.
If not assembled in the correct order, the parts will not fit.
Please take the time to read and understand every step, before you do it.
The tub bulkheads are designed to go in one way, and the bulkhead doubl
ers (“A”) must face a
certain way.
Note that this manual contains photos of boats other than the Envy. We do this to better
illustrate the construction step.
We also do this when we forget to take certain photos, and don’t want to build another boat just
to get that pic…