WWW.
ZIPPITY
-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19027
STEP 4.1
STEP 5.1
STEP 4.2
Slide the Post
Arm
(C)
down over
the post as shown.
The top of the
post arm should be
about 42” above
the ground.
Pressure fit the Post Caps
(A)
into place as shown. You
can secure the post caps more permanently using PVC
glue if necessary.
Drive (4) 3” Self-Drilling Stainless
Steel Screws
(K)
through the pre-
drilled holes on the post arm as
shown.
STEP 4:
INSTALL
POST ARM
STEP 5:
INSTALL
POST CAPS
C
A
42”
K
Note:
Slightly angle the 2½”
self-drilling stainless steel
screws on one side to keep
them from running into each
other inside the post.
