WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
ZP19027
STEP 3.2
STEP 3.3
With a helper, carefully lift the
assembled unit, and place the
post over the pipe anchor.
With the ¼” Hardened Steel Drill Bit
(L)
, pre-drill
(2) holes through the post and pipe anchor as
shown. The holes should be approximately 4” and
16” above the ground and centered on the groove
of the post. Fasten with (2) ⅝” Tek Screws
(J)
.
J
L
