WWW.
ZIPPITY
-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19027
STEP 3:
INSTALL
PIPE ANCHOR
STEP 2.5
STEP 3.1
STEP 2.6
Slide (2) planter
box posts over
the side board
walls as shown.
Locate where you would like the post to be installed. Using a sledge hammer, drive the Pipe
Anchor
(I)
approximately 18” into the ground (18⅝” above the ground).
BEST
BETTER
Slide the Rear
Board Walls
(D)
down into place
as illustrated.
I
D
10lb Sledgehammer
5lb Sledgehammer
Hammer
Note:
Check if the pipe anchor is level in both direc
-
tions at about 6” intervals as you pound it into the
ground. Usually, after it is about 12” into the ground,
the trajectory is established, and you can no longer
level the Pipe Anchor.
18⅝”
