WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
ZP19060
1.
Insert (10) Vertical Slats
(A)
into the routed holes in the Middle
Rails
(G)
.
2.
Insert (1) End Rail
(F)
over the top of the picket tabs as shown.
3.
Insert the second end rail over the bottom of the pickets.
STEP 2.2
2
1
3
Preview
G
A
F
STEP 5:
ASSEMBLE
LATTICE TOP
STEP 5.1
NOTE: Middle rails will have picket holes on both sides.
STEP 6.1
1.
Slide the lattice top into the routed holes in the left post.
2.
Drive (2) 3/4" self-drilling stainless steel screws into the pre-drilled
holes in the post.
STEP 6:
ASSEMBLE
PANELS
Preview
2
1
