WWW.
ZIPPITY
-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19060
STEP 4:
INSTALL
BOARDS
STEP 4.1
1.
Layout (1) the left post and slide a single Board - Narrow
(H)
into the bottom of the cut grooves in the post.
2.
Insert (3) Board - Wide
(I)
into the slot in the post.
3.
Drive (1) 3/4" self-drilling stainless steel screws
into the second
lowest pre-drilled hole on the left post.
Preview
2
1
3
H
D
I
STEP 3:
INSTALL
GROUND STAKES
STEP 3.1
Preview
2
1
D
14 in
1.
Insert (2) Ground Stakes
(B)
up the bottom of the Left Post
(D)
and the Right Post
(E)
.
2.
Slide the ground stakes until the pre-drilled holes in the stakes
align with the pre-drilled holes in the posts. Drive (2) 3/4" Self-
Drilling Stainless Steel Screw
(K)
into the lowest pre-drilled holes
on the posts.
K
B
E
