WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
ZP19071
STEP 3.3
1.
Use the 1/16” Drill Bit
(N)
to pre drill holes in the post anchor through the pre drilled holes
in the wing bottom rail.
2.
Drive (4) ¾” white self-tapping stainless steel screws through the pre drilled holes in the
wing bottom rail.
1
2
N
STEP 4:
ASSEMBLE
THE GATE FRAME
STEP 4.1
1.
Slide (1) Gate Top Rail
(E)
over the bottom of the
Gate Posts
(B)
until the pre-drilled
holes in the gate top rail and top of gate posts align.
Slide (1)
Gate
Bottom Rail
(D)
over the
bottom of the gate posts
until the pre-drilled holes in the
gate
bottom rail and bottom of
gate posts align.
2.
Drive (7) total 3/4” white self-tapping stainless steel screws through the pre-drilled holes
in the rails. One screw will be left off the top right of the frame for future latch installation.
E
D
B
1
2
Align
Leave screw off here
for latch installation.