WWW.
ZIPPITY
-OUTDOOR.COM
10
ASSEMBLY
INSTRUCTIONS
ZP19071
Attempt to push the wing posts into the ground at the marked locations. If your ground is
too hard, follow these steps illustrated below:
1.
Loosen the top 6” to 8” of the ground using a claw hammer or similar tool.
2.
Add water to soften the soil.
3.
Use a block of wood to protect the top of the wing post and gently hammer each wing
post into the ground until the bottom wing rails are roughly 1” above the ground.
1
2
3
STEP 6.2
