70
ZIPPIE SALSA R
2
/ ZIPPIE SALSA M
2
Rev.2.0
• With the seating in an elevated position, drive the
wheelchair to make sure that the ‘creep’ mode works
which will slow the wheelchair.
• Drive the wheelchair in each of the drive profiles to
make sure the wheelchair performs as it did before.
CAUTION!
• If you are in any doubt about the performance
requirements of your wheelchair contact your Sunrise
Medical authorised dealer.
• You should check the items on this chart at the
indicated intervals. If any of the items are loose, worn,
bent or distorted, immediately have them checked
and/or repaired by your authorised Sunrise supplier.
• Frequent maintenance and servicing will improve
performance, extend wheelchair life, and help prevent
injuries.
13.16 Performance checks
After performing any maintenance or repairs on the
wheelchair you must make sure that it is functioning
correctly before it is used.
• Visually inspect the wheelchair to make sure the
leg rests, armrests etc are correctly positioned and
attached to the wheelchair and all fasteners are
sufficiently tightened.
• Make sure that the backrest is correctly fitted and
adjusted.
• Make sure that all of the cushions are in place
• Switch on the hand control – Do the lights flash? This
signifies that there is a fault in the electronic system.
Refer to section 8 for basic troubleshooting.
• Perform the parking brake check.
• Operate all of the electric options, including lights
and indicators (if fitted) to make sure that they work
correctly.
Maintenance & Inspection Schedule
Daily
*
W
eekly
Quarterly
Annually
Check battery level indicator and charge if necessary
¯
Check the joystick of the hand control is not bent or damaged
¯
Ensure all parts and assemblies are securely fastened
¯
Checkanterior pelvic support for wear and make sure the buckle is operational
¯
Motor Brake Test
¯
Check tyre condition and wheel fasteners.
¯
Ensure lights and indicators, (where fitted), are operational and clean
¯
Ensure all cables and connectors are sound and are tidy and out of the way
¯
Check upholstery, seating, headrests, arm pads and calf pads for wear.
¯
Inspect all nuts, bolts, studs and fasteners for damage and tightness. Contact your authorised dealer for
service assistance.
¯
Clean wheelchair upholstery
¯
Check battery terminals for tightness etc.
¯
Complete inspection, safety check and service should be made by a Sunrise Medical authorised dealer
¯
Fig.13.35
Daily = Before each use of the wheelchair.
*
