ENGLISH
22
Zippie RS Rev.1.0
14.0 Name Plate
Nameplates
The name plate is located on either the cross-tube assembly or
the transverse frame tube, as well as on a label in the owner’s
manual. The nameplate indicates the exact model designation
and other technical specifications. Please provide the following
pieces of information whenever you have to order replacement
parts or to file a claim:
Due to our policy of continuous improvement in the design of our
wheelchairs, product specifications may vary slightly from the
examples illustrated. All weight/dimensions and performance
data are approximate and provided solely for guidance.
Sunrise Medical complies with the EU Medical Devices Directive
93/42/EEC
All wheelchairs must be used in accordance with
the manufacturer’s guidelines.
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD
England
Phone: 0845 605 66 88
Fax:
0845 605 66 89
www.SunriseMedical.co.uk
12.0 Tyres and Mounting
Solid rubber tyres are standard.
With pneumatic tyres always make sure that the tyres have the
correct air pressure, as otherwise the performance of the
wheelchair may be affected. If the tyre pressure is too low,
rolling resistance will increase, requiring more effort to move the
chair forward. Low tyre pressure also has a negative impact on
manoeuvrability. If the tyre pressure is too high, the tyre could
burst. The correct pressure for a given tyre is printed on the
surface of the tyre itself.
Tyres are mounted the same way as an ordinary bicycle tyre.
Before installing a new inner tube, you should always make
sure that the base of the rim and the interior of the tyre are free
of foreign objects. Check the pressure after mounting or
repairing a tyre. It is critical to your safety and to the
wheelchair’s performance that regulation air pressure be
maintained and that tyres be in good condition.
Product Name/SKU Number.
Maximum safe slope with anti-tips fitted,
Depends on wheelchair setting, posture
and physical capabilities of the user.
Seat width.
Depth (maximum).
Load Maximum.
CE Mark
User’s Guide.
Crash Tested
Date of manufacture.
Serial number.
t
SAMPLE
RubiX
2
RubiX
2
Zippie RS
Zippie RS
ZRS
Overall width:
With standard wheels including handrims, close mount:
min = 530mm, max = 630mm
Overall height:
min = 800mm, max = 1450
Overall length including foot rests:
min = 900mm, max = 1450mm.
Maximum load: 125kg.
Weights in kg:
min = 18kg, max = 26kg
Heaviest part (Wheel) = 2.1kg
Footrest = 0.8kg
Side Guard Assembly = 1.3kg
Wheel (each) = 2.1kg
ALSO SEE PAGE 4
13.0 Technical Data
ADDITIONAL NOTES
In Accordance with EN12183: 2009 all there listed parts
(Composite footboard, side panel...) are fire resistant as per
EN1021-2 .
The Dynamic safe slope is dependant on the chair configuration,
the users abilities and the style of riding. As the users abilities and
style of riding cannot be predetermined then the max safe slope
cannot be determined. Therefore this must be determined by the
user with the
assistance of an attendant to prevent tipping. It is strongly
recommended that inexperienced users have Ant-tips fitted.
The wheelchair conforms to the following standards:
a) Requirements and test methods for static, impact and fatigue
strengths (ISO 7176-8)
b) Requirements for resistance to ignition in accordance with ISO
7176-16 (EN 1021-1).
Summary of Contents for RS
Page 24: ...24 Zippie RS Rev 1 0...
Page 42: ...42 Zippie RS Rev 1 0...
