ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
Strana 43
Pásový přepravník / Mini transporter ZI-MD300 ZI-MD300G ZI-MD500 ZI-MD500H
Seite 43
16
TROUBLE SHOOTING
Trouble
Possible cause
Solution
Engine will not start
•
If the ignition is not on the spark
plug?
•
Fuel tank is empty or the dirty
fuel
•
cold-start choke is not actuated
•
Fuel line is clamped
•
Dirty spark plug
•
Engine is flooded
•
Attach spark plug wire to spark
plug
•
Fill the fuel and ensure clean fuel
line
•
Set the throttle lever in cold start
to choke position.
•
Put fuel line free
•
Clean the spark plug, replace it
•
Wait a few minutes and start
without throttle control
Engine runs
irregularly
•
Ignition loosely attached
•
Engine is still running with choke
position
•
Pinched fuel line or old impure
fuel
•
Clogged intake air filter
•
Water or contaminated fuel
•
A dirty air filter
•
Carburetor not adjusted properly
•
Attach spark plug wire securely
•
Put choke lever to OFF (OFF)
•
Remove or clean fuel line. Clean
fuel tank and refill with fresh
gasoline
•
Make free intake
•
Clean the air filter
•
Clean fuel tank and refill with
fresh gasoline
•
Can be set by expert
overheated engine
•
Engine oil level too low
•
Air filter dirty
•
Carburetor not adjusted properly
•
Engine oil (see 8.3)
•
Clean the air filter (see 8.4)
•
Can be set by expert
End of the chain is
blocked
•
Foreign material between the
chains and Chassis
•
Remove foreign body
Machine does not
run with the engine
running
•
Gear is not engaged properly
•
Drive chains are not tightened
•
Shift lever in right position switch
•
Tension drive chains
