ASSEMBLY
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
Seite 34
Miniraupendumper / Mini transporter ZI-MD300 ZI-MD300G ZI-MD500 ZI-MD500H
Seite 34
13.2
Assembly
13.2.1
ZI MD300 / ZI MD300G
Position the bottom panel inside the
mounting bracket. Align the holes with the
mounting bracket.
Insert a long pin through holes and secure
each side with a flat washer and cotter pin.
Align the holes of the handlebar with the
mount bracket and secure each with a
spring washer, flat washer and a M10x20
bolt . Fasten each handlebar support onto
the engine deck with a spring washer, flat
washer and a M8x25 hex bolt.
Place the engine guard inside the mounting
bracket and align with the mounting
bracket holes. Secure panel left side with
two M8x30 hex bolts, four washers and two
nuts. Mount the tipping handle on panel
right side. Align holes and fasten with two
M8x35 hex bolts, four washers and two
nuts.
Insert the extendable sides into
mounting slots located on the bottom
panel.
