ASSEMBLY
28
ZI-ZSM600
WARN IN G
Risk of injury from suspended or unsecured load!
Damaged or insufficiently strong hoists and load slings can result in serious injury or even
death.
Before use, therefore, check hoists and load slings for adequate load-
bearing capacity and perfect condition. Secure the loads carefully. Never
stand under suspended loads!
13.1
Lifting the machine from a transport pallet
•
Hang the hoist on the transport attachment points (1) of the
machine.
•
Make sure that the weight is evenly distributed.
•
Carefully lift the machine from the transport pallet.
•
Avoid jerky movements and ensure that the machine is ap-
propriately secured!
14
ASSEMBLY
14.1
Preparation
14.1.1
Checking delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or missing
parts to your dealer or the shipping company immediately. Visible transport damage must also be noted
immediately on the delivery note in accordance with the provisions of the warranty, otherwise the goods
are deemed to have been properly accepted.
14.1.2
Requirements for the installation site
The selected installation site must ensure a suitable connection to the electrical mains and must
provide a water connection. Observe the safety requirements and the dimensions of the machine.
Place the machine on a level, solid surface. The chosen installation site of the machine must comply
with the local safety regulations as well as the ergonomic requirements for a workplace with
sufficient lighting conditions.
N OTE
The floor at the installation site must be able to bear the load of the machine!
When dimensioning the required space, take into account that the operation, maintenance and repair of
the machine must be possible without restrictions at all times.
