Zipper Mowers 9120039233611, User Manual

Page: 19 / 48

SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  19
ZI-ASA550E
12 SAFETY
12.1 Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Extract of wood dust, wood and plastic chips.
Any manipulation of the machine or its parts is a misuse, in this case
ZIPPER-MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
W A R N I N G

Inflammable gases (e.g. paint or varnish mist) must not be extracted.

Polyethylene dust bags must be a minimum thickness of 0,2mm!

When using bags made of other materials the mechanical strength must be
the same!

Refer the user manual of the connected woodworking machine!
Ambient conditions
The machine may be operated:
humidity max. 70%
temperature +5°С to +40°С (+41°F to +104°F)
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use
 The operation of the machine outside the stated technical limits described in this manual
is forbidden.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being certified
is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is
forbidden.
 The unattended operation on the machine during the working process is forbidden!
 It is not allowed to leave the immediate work area during the work is being performed.
12.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the
operator and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!