MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-WP700T
1.
Install a new saw blade.
2.
Use the lock pin A to secure the saw blade against
turning.
3.
Reinstall the key, flange, washer, bolt and use the
spanner tight the M12x30 bolt.
1.
Reinstall the Ø4 cotter pin on the support
pin.
2.
And the Ø6 washer and M6 screw on the
movable guard.
14.1.1
Cleaning
14.1.2
Storage
If the machine more than a month is not used, please follow these instructions:
Entire remove fuel from the tank, fuel cock and carburetor.
Water from the tap and remove line (this is to do in cold weather after each use)
Remove spark plug, pour about 1 tablespoon of engine oil into spark plug hole
Engine switch to the OFF
Operate starter rope several times
Spark plug insert
Generator in a dry, well ventilated place, cover.
14.1.3
Disposal
Do not dispose of them your ZI-WP700H in residual waste. Contact your local
authorities for information regarding. Of available disposal options. If you buy
at your local dealer a new machine or an equivalent device, this is in certain
countries committed to dispose of your old machine professionally
.
N O T E
Cleaning: The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners
will result in damage to the surface!
Therefore: When cleaning, use only mild detergent
Fig. G
Fig. H
