OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
21
ZI-WP700T
13.2
Operation
13.2.1
Saw blade start / Stop
If you want to press the ON - OFF switch, the combined
EMERGENCY STOP switch must be in the open state.
To start, press the green button ˝ I ˝
To stop, press the red button ˝ O ˝
INFO: In the closed state of the main switch can be operated as an EMERGENCY STOP switch.
Important:
Do not start the machine until completely for maximum speed before you start sawing.
13.2.2
Saw cut
1.
Position the cut on the fully extended Wippeinheit in the product tray.
2.
Turn on the machine.
3.
Grasp with both hands the rocker handle (5).
4.
Now move the rocker unit carefully before.
5.
By hook in the tilting unit, the workpiece before twisting is protected.
6.
After the cut, move the rocker again all the way back.
7.
Position optionally a further cut in the product tray, this is to be supplied from the left to the
cutting plane. Repeat steps 3, 4 and 5.
8.
Turn off the machine after work.
9.
Wait until the machine is still again.
13.1
Transport
For transport, the rocker is placed so that the transport lock can
be suspended in a clockwise direction on the cross strut
